Products

  1. Home
  2. Products
  3. Viking Electronics
  4. Specialty
  5. Accessories
  6. Emergency Phones
  7. Viking Electronics E-40-SS with Enhanced Weather Protection

Viking Electronics E-40-SS with Enhanced Weather Protection

SKU: VK-E-40-SS-EWP Category:

$359.21

Viking Electronics E-40-SS with Enhanced Weather Protection VK-E-40-SS-EWP

  • Viking entry phone with weather protection
  • Compact size: Front panel is the size of a typical single gang midsize wall plate
  • Mounting: Flush mounts in a single gang electrical box (2.25? deep x 2.00? wide x 2.84? tall minimum) or surface mounts in a Viking model VE-3x5 (not included, see DOD# 424)
  • Available in 5 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
  • PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes
  • Vandal Resistant Features: 16 gauge polished brass or 18 gauge 304 stainless steel faceplate, 316 stainless steel push-button, carbon fiber reinforced plastic speaker screen, scratch-resistant powder coating, hex drive mounting screws
  • Weather Resistant Features: Mylar speaker, faceplate gasket, mic, and speaker gasket, internally sealed (IP67) push button switch, self-draining mic mount, and UV stable weather-resistant powder coating (excluding E-40-SS 304 Stainless Steel faceplate)
  • E-40-EWP is designed to meet IP66 Ingress Protection Rating (see DOD# 859 for more information)
  • Telephone line powered
  • Microphone and speaker volume controls
  • Programmable Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
  • Selectable auto answer feature for monitoring
  • Programmable VOX (mic/speaker) switching speed
  • Blue LED helps locate push button, indicate ringing and off hook
  • Power: Telephone line powered. Minimum 18V DC talk battery voltage with a minimum loop current of 20mA. Loop current may be boosted on low current lines with a Viking model TBB-1B Talk Battery Booster (see DOD# 632).
  • Dimensions: Faceplate: 123.8mm x 79.4mm x 4.6mm (4.875? x 3.125? x 0.18?), Phone: 72mm x 46mm x 42mm (2.84? x 1.8? x 1.65?)
  • Operating Temperature: -34° C to 65° C (-30° F to 150° F)
  • Humidity: Standard model: 5% to 95% non-condensing humidity, EWP model: up to 100% humidity
  • Speaker Volume: Approximately 62db maximum @ 1m
  • Ring Voltage: 25V AC RMS minimum (for auto answer)
  • CPC Disconnect Time: 300ms minimum
  • REN: 0.8A
  • Connections: (2) gel-filled butt connectors

Additional information

Condition